2024 EXHIBITION SHOWCASE
2024 EXHIBITION SHOWCASE
Source the latest innovations in adhesives & bonding
Below is just a taste of the products and exhibiting companies that you will find on the show floor this June, register for free today to secure your pass to the entire event.
Booth number: 822
ITW Dynatec UFD HIGH SPEED™ adhesive applicator
The ITW Dynatec UFD HIGH SPEED™ adhesive applicator offers unparalleled precision and speed with patented patterns, reducing adhesive usage by 70% while maintaining bond strength. It's ideal for high-speed applications, with rapid changeover and precise control.
Booth number: 822
ITW Dynatec UFD HIGH SPEED™ adhesive applicator
The ITW Dynatec UFD HIGH SPEED™ adhesive applicator offers unparalleled precision and speed with patented patterns, reducing adhesive usage by 70% while maintaining bond strength. It's ideal for high-speed applications, with rapid changeover and precise control.
Booth number: 1032
GS# 517-1 Sealant
GS# 517-1 Sealant represents a cutting-edge solution in many industries. This uniquely formulated sealant is renowned for its permanent flexibility and is tailored for applications in low-energy environments, porous substrates, and challenging low ambient temperatures. In the foam industry, GS# 517-1 Sealant becomes integral, providing enduring flexibility crucial for varied foam applications. Its ability to form a tenacious bond on porous surfaces makes it a preferred choice in foam manufacturing, ensuring stability and longevity.
Booth number: 1032
GS# 517-1 Sealant
GS# 517-1 Sealant represents a cutting-edge solution in many industries. This uniquely formulated sealant is renowned for its permanent flexibility and is tailored for applications in low-energy environments, porous substrates, and challenging low ambient temperatures. In the foam industry, GS# 517-1 Sealant becomes integral, providing enduring flexibility crucial for varied foam applications. Its ability to form a tenacious bond on porous surfaces makes it a preferred choice in foam manufacturing, ensuring stability and longevity.
Booth number: 725
Novagard 500-PV Photovoltaic Assembly Silicone Sealant
Novagard 500-PV Photovoltaic Assembly Silicone Sealant is a two-component, variable ratio alkoxy condensation cure thixotropic paste. With a moderate RT curing speed, 500-PV allows sufficient time for large components and complex assemblies to adhere during manufacturing, providing significantly greater throughput with very good adhesion to glass, aluminum, and composites.
Ideal for applications where long-term temperature cycle resistance, UV exposure, and harsh exposure conditions exist, including solar panel/frame assembly, bonding & sealing, encapsulation, and high-speed manufacturing.
Booth number: 725
Novagard 500-PV Photovoltaic Assembly Silicone Sealant
Novagard 500-PV Photovoltaic Assembly Silicone Sealant is a two-component, variable ratio alkoxy condensation cure thixotropic paste. With a moderate RT curing speed, 500-PV allows sufficient time for large components and complex assemblies to adhere during manufacturing, providing significantly greater throughput with very good adhesion to glass, aluminum, and composites.
Ideal for applications where long-term temperature cycle resistance, UV exposure, and harsh exposure conditions exist, including solar panel/frame assembly, bonding & sealing, encapsulation, and high-speed manufacturing.
Booth number: 1212
Expancel® microspheres
Expancel® microspheres – a small sphere encapsulating a gas, expanding up to 60 times when subjected to heat. With Expancel® microspheres in the mix it’s possible to create exceptionally lightweight foam, while saving cost and retaining or even improving mechanical properties like abrasion resistance and surface quality of the foam. Expancel® microspheres serve a dual purpose as a lightweight filler and a blowing agent, supported by solid technology know-how for smooth integration into any process.
Booth number: 1212
Expancel® microspheres
Expancel® microspheres – a small sphere encapsulating a gas, expanding up to 60 times when subjected to heat. With Expancel® microspheres in the mix it’s possible to create exceptionally lightweight foam, while saving cost and retaining or even improving mechanical properties like abrasion resistance and surface quality of the foam. Expancel® microspheres serve a dual purpose as a lightweight filler and a blowing agent, supported by solid technology know-how for smooth integration into any process.
Booth number: 1002
Lohmann DuploCOLL LE Product Portfolio
The tapes of our DuploCOLL LE product portfolio are 100% solvent-free, meeting the automotive industry's stringent requirements for low VOC, low fogging, and low odor values. Tested according to VDA standards, they fulfill OEMs' demands for VOC and FOG, allowing improved air quality. At Lohmann, we collaborate closely with our customers to provide customized bonding solutions from concept to production. Our expertise in adhesive tape manufacturing and die-cutting enables us to meet your specific requirements.
Booth number: 1002
Lohmann DuploCOLL LE Product Portfolio
The tapes of our DuploCOLL LE product portfolio are 100% solvent-free, meeting the automotive industry's stringent requirements for low VOC, low fogging, and low odor values. Tested according to VDA standards, they fulfill OEMs' demands for VOC and FOG, allowing improved air quality. At Lohmann, we collaborate closely with our customers to provide customized bonding solutions from concept to production. Our expertise in adhesive tape manufacturing and die-cutting enables us to meet your specific requirements.
Booth number: 1021
Avery Dennison
The Avery Dennison Cold Tough™ Adhesive Tapes Portfolio delivers strong bonding solutions for building material applications in extreme cold temperature and humid conditions. These all-weather tapes are easy-to-apply and boast long-term durability for a variety of building and construction applications. With Cold Tough™ Tapes, you can choose from multiple tape and adhesive configurations for an array of installation surfaces, including metals and plastics. Learn more about Cold Tough™ tape products here and visit Booth #1021.
Booth number: 1021
Avery Dennison
The Avery Dennison Cold Tough™ Adhesive Tapes Portfolio delivers strong bonding solutions for building material applications in extreme cold temperature and humid conditions. These all-weather tapes are easy-to-apply and boast long-term durability for a variety of building and construction applications. With Cold Tough™ Tapes, you can choose from multiple tape and adhesive configurations for an array of installation surfaces, including metals and plastics. Learn more about Cold Tough™ tape products here and visit Booth #1021.
Booth number: 600
CollTech Material Solutions for Board Level Applications
CollTech specializes in customized formulation manufacturing and packaging, offering rapid response to address diverse electronic device and component applications. Our solutions cover encapsulation, reinforcement, thermal interface materials, edgebonding, underfill, conformal coating, electrically conductive adhesives, structural bonding, peelable masking, and more. Reach out to us at [email protected] for further details.
Booth number: 600
CollTech Material Solutions for Board Level Applications
CollTech specializes in customized formulation manufacturing and packaging, offering rapid response to address diverse electronic device and component applications. Our solutions cover encapsulation, reinforcement, thermal interface materials, edgebonding, underfill, conformal coating, electrically conductive adhesives, structural bonding, peelable masking, and more. Reach out to us at [email protected] for further details.
Booth number: 825
L&L Bond L-5280
L&L Bond L-5280 is a one-component thermosetting hot melt structural adhesive developed for roll coat applicators. This adhesive performs well in high-speed, low-temperature impact scenarios while maintaining a Tg greater than 120C. It is dry to the touch at 23C and has a working time greater than 3 hours at 130C.
Booth number: 825
L&L Bond L-5280
L&L Bond L-5280 is a one-component thermosetting hot melt structural adhesive developed for roll coat applicators. This adhesive performs well in high-speed, low-temperature impact scenarios while maintaining a Tg greater than 120C. It is dry to the touch at 23C and has a working time greater than 3 hours at 130C.
Booth number: 926
KUKA System
Robatech’s ability to integrate adhesive application systems onto robots/cobots greatly improves cycle times, reduces adhesive consumption, and significantly improves quality. Robatech has collaborated with many robot/cobot manufacturers around the globe offering automated adhesive application solutions worldwide.
Booth number: 926
KUKA System
Robatech’s ability to integrate adhesive application systems onto robots/cobots greatly improves cycle times, reduces adhesive consumption, and significantly improves quality. Robatech has collaborated with many robot/cobot manufacturers around the globe offering automated adhesive application solutions worldwide.
Booth number: 1016
MaintainX Mobile-First Maintenance and Asset Management
MaintainX revolutionizes maintenance and asset management with its intuitive, mobile-first platform. Streamline workflows and enhance productivity by managing work orders, tracking inventory, and ensuring compliance—all from your smartphone or tablet. Ideal for the dynamic needs of the adhesives and foam sectors, MaintainX ensures real-time communication and up-to-date data access, making it the perfect tool for on-the-go professionals looking to optimize operations and reduce downtime.
Booth number: 1016
MaintainX Mobile-First Maintenance and Asset Management
MaintainX revolutionizes maintenance and asset management with its intuitive, mobile-first platform. Streamline workflows and enhance productivity by managing work orders, tracking inventory, and ensuring compliance—all from your smartphone or tablet. Ideal for the dynamic needs of the adhesives and foam sectors, MaintainX ensures real-time communication and up-to-date data access, making it the perfect tool for on-the-go professionals looking to optimize operations and reduce downtime.
Booth number: 532
SA-73025 Silver Flake
SA-73025 is a mid-range tap density, low surface area, low weight loss flake that is dispersible in multiple base formulations and has been specifically designed for Die Attach. Other applications include High Temperature and Low Temperature Polymer Thick Film Conductive Pastes.
Booth number: 532
SA-73025 Silver Flake
SA-73025 is a mid-range tap density, low surface area, low weight loss flake that is dispersible in multiple base formulations and has been specifically designed for Die Attach. Other applications include High Temperature and Low Temperature Polymer Thick Film Conductive Pastes.
roll-ex® PDSE
The PDSE solution (Polymer Dosing System) enables precise and consistent dosing of viscous as well as highly viscous polymers in continuous mixing processes of adhesives. It’s based on the modular designed roll-ex® system, consisting of a gear pump combined with a compatible feeding unit. Depending on the material to be dosed, a screw extruder (SF) or a conical twin-screw extruder (DSE) of different sizes is used.
roll-ex® PDSE
The PDSE solution (Polymer Dosing System) enables precise and consistent dosing of viscous as well as highly viscous polymers in continuous mixing processes of adhesives. It’s based on the modular designed roll-ex® system, consisting of a gear pump combined with a compatible feeding unit. Depending on the material to be dosed, a screw extruder (SF) or a conical twin-screw extruder (DSE) of different sizes is used.
Reminder...
To access all these new, great technologies (plus hundreds more!) you must pre-register for your free pass.